How to Reset a Taylor Scale: Tips on Using The Scale Properly

How to Reset a Taylor Scale

Taylor scales are popular because they provide accurate measurements, and are easy to use. Plus, some of their variants can even measure more weight compared to its competitors. The Taylor scales are reliable and even durable as the company has been manufacturing measuring instruments for over a century now. Many people, however, are unsure of how to reset a Taylor scale after buying one. If you are one of those who have questions about using the device, then this article will offer you the information you need.

A Note About The Manufacturer

Taylor is a well-respected and widely popular brand when it comes down to weight tracking. It has a long history as the company was started by George Taylor back in 1851. Taylor’s motto has always been about ensuring accuracy for its products. It has been producing measuring devices including weighing scales, thermometers and even altimeters for fighter planes for the past 150 years.

Taylor is known for its precise measurements, the cornerstone of its business. It has become one of the leading manufacturers of scales, thermometers and other measuring devices in North America.

How Taylor Scales Work

So many people make the mistake of just buying a weighing scale and failing to understand how the tool works. To fully utilize a scale, it is best to know how to operate it properly.

Measuring the body’s fat as against your lean mass is a good way to know and understand your body and health. Scales that measure body fat have two electrodes situated under each foot, and these electrodes send a low-level electrical current via the body. However, do take note that the electrical current transmitted is a harmless one. The signal goes through the lean mass fast, and on the other hand, the fat slows down the current. As a result, the scale can estimate how much fat is in one’s body as well as what is the percentage of the lean mass.

The Taylor body fat scales run on batteries. To avoid having the battery drained, flip the scale and take out the plastic slip found in the compartment for the battery.

Additionally, the scale measures both fats and weight in pounds. However, for those who would prefer to use kilos, simply find the switch located at the bottom of the scale to change to your chosen unit of measurement.

Calibrating the Scale

Many people make a mistake of just stepping on their weighing scales immediately. Just like with many digital scales on the market, the Taylor Scale requires calibration first before using it. This is for accuracy purposes.

Calibrating the tool is easy. One only needs to find a flat ground or surface where you intend to take your weight regularly. Many people place the scale in the bathroom, but any flat surface at home will do. After placing it on the ground, turn the device on and press the platform lightly until you see the zero pattern appear on the scale’s screen. The scale will turn off by itself, which means that you can start weighing yourself as it is already calibrated.

It is highly advisable to place the weighing scale on a fixed location rather than moving it around as you will need to recalibrate it if you move it from one place to another. When you change its batteries, you will need to recalibrate it as well.

Entering the Personal Data

Saving your information is needed to have your body fat analyzed accurately. One only needs to turn on the device and enter the data being asked in either of the three slots. The up and down arrows can be used to navigate and enter the information like your age, gender, and height. You need to press the “set” button after entering each of the data asked.

How to Reset a Taylor Scale?

Many people often wonder if resetting a Taylor scale is necessary since they are scared that they may do the task incorrectly, which can result in the malfunctioning or breaking down of the tool.

Users must keep in mind that resetting this scale will also erase all of the data that was stored by the device. So, if it needs a resetting, then users will have to re-enter their data after.

How to reset a Taylor scale is an easy task to do. One only needs press the power button and watch as the scale provide the information it has saved. Now, one has to press both the down and up button for roughly three seconds to clear the data for that user.

The same process must be done for each user profile saved by the device to clear out all of its memory.

After erasing all the data saved, proceed to remove the battery from the device. Take out the battery for at least five minutes before placing them back. The resetting of the scale is finished after returning its batteries.

Understanding the Errors

Sometimes, the scale would come up with errors. If this keeps on happening, then perhaps it would be best to reset the scale to ensure the correct and precise measurements that Taylor is known for. It is best, too, to understand these error messages. Many people get confused on what the scales say. However, the errors are easy to understand. Check out below what each error means.

  • Error 0 means initialization.
  • Error 1 pertains to instability such as when it is not located on a flat surface.
  • Error 2 means that the device is either overloaded or jarred.
  • Error 3 is a contact error where usually the feet are not wet for the reading of the body fat, or the feet are too small to reach the sensors.
  • Error 4 means that the body fat is not within range.
  • Error 5 means that the water is not within range.

Sometimes, the best ways to avoid errors is to ensure proper use of the device. It pays to read the user manual before stepping on the scale immediately. If one wants the scale to last long, then it is highly recommended to read and understand what the user manual says and consult it frequently if you are unsure about its use.

Leave a Reply

Your email address will not be published. Required fields are marked *

*